作者：M.M. Elwan, H. EI-Didamony, S.M. Hafeez
作者單位：
刊名：refractories worldforum
ISSN：
出版年：2012-04-01
卷：
期：4
起頁：
止頁：
分類號：
語種：英文
關鍵詞：
內容簡介Blast furnace slag is a by-product from the production of pig-iron, which has caused some pollution problems in the area around the Steel Iron Company in Helwan/EG. The utilization of this waste product in the production of any product therefore saves money and prevents pollution of the atmosphere. Alkali-activated Slag (AAS) is a binder that can be used as a substitute for Ordinary Portland Cement (OPC) thanks to its ability to resolve most of the problems associated with OPC. AAS can be prepared by the activation of granulated slag by an activator. In this research work the granulated slag is activated with 2, 4, 6 and 8 mass-% NaOH and cured in humidity and under tap water. A comparative study of the physico-mechanical properties in the two curing conditions was investigated. The results revealed that curing in humidity (100 % RH) is better than under tap water as there is no leaching of certain materials.
所需耐材幣：0
